dbx 2215 2 x 15-kaistainen graafinen taajuuskorjain/Limitteri

3 Arvostelua


dbx 2215 - 2 x 15-kaistainen graafinen taajuuskorjain / rajoitin.


It's amazing. One little button. So much effect. dbx® Type III® Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQs possible, boxes with the heritage and performance to rival our famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.


But hey, Roger wasn't about to stop there. PeakPlus Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx® Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!

  • Vallankumouksellinen välitön koodaus/dekoodaus Tyypin III® melunvaimennus piirin sisällä napin painalluksella. Parantaa S/N-suhdetta jopa 20dB:llä
  • Patentoitava PeakPlus? Limiterin kynnysarvojen vaihteluväli 0dBu:sta +24dBu:hun (pois päältä) kesyttää läpinäkyvästi minkä tahansa signaalin villeimmät hitit tai hienoimmat vivahteet.
  • Erittäin laadukas EQ, patentoitava Type III® Noise Reduciton ja tyylikäs uusi PeakPlus? Rajoitin kaikki yhdessä upeasti kuulostavassa laatikossa
  • Neljän segmentin LED-palkki sekä vahvistuksen vähennyksen että lähtötason osalta tarjoaa kattavimman saatavilla olevan visuaalisen palautteen.
  • Tila-LEDit tarjoavat visuaalista palautetta kaikista etupaneelin asetuksista.

Hintavastaava ja turvallinen toimitus

€ 543,00
Paras hinta i
Erikoistuote: Toimitetaan 2-4 työpäivä
Ilmainen toimitus

Suosittelemme myös ostamista

dbx 2215 on 15-kaistainen graafinen dual-ekvalisaattori, jossa on dbx Type III -kohinanvaimennus ja PeakPlus Limiter -järjestelmä.

dbx 2215 on absoluuttisen huippulaadukas taajuuskorjain ja vaikuttava äänenlaatu edulliseen hintaan.

Kuten tavallista, dbx on kehittänyt 2215:n kompaktissa kotelossa, jossa kaikki painikkeet ja faderit on sijoitettu selkeästi.

Tekniset tiedot:

Malli/tuotenumero: DBX-2215
EAN: 4050310004690
Input Connectors 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +/-0.5dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB
Signal-to-Noise (NR In: +/-6 and +/-15dB ranges) >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range (NR In: +/-6dB and +/-15dB ranges) >120dB, unweighted
Signal-to-Noise (NR Out: +/-6dB range) >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
Dynamic Range (NR Out: +/-6dB range) >112dB, unweighted
Signal-to-Noise (NR Out: +/-15dB range) >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range (NR Out: +/-15dB range) >108dB, unweighted
THD+Noise <0.04%, 0.02% typical at +4dBu, 1kHz
Interchannel Crosstalk <-80dB, 20Hz to 20kHz
Noise Reduction Up to 20dB of dynamic broadband noise reduction
NR Switch Activates dbx Type III Noise Reduction
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
Range Switch (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
I/O Meter 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Gain Reduction Meter 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
Indicators NR Active (Yellow); EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
Power Consumption 28W
Power Connector IEC receptacle
Dimensions 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
Unit Weight 8.5 lbs. (3.9 kg)
Shipping Weight 9.5 lbs. (4.3 kg)